Click Here To View The Datasheet

Click Here To View The User Manual

Movements:

• Manual backrest angle adjustment
• Manual leg rest angle adjustment
• Manual height adjustment (hydraulic pump assisted)
• Manual removeable arm rests

Dimensions/Specifications:

• Length: 72.5"
• Width without arm rests: 25"
• Width with arm rests: 32.5"
• Heights: 24.5" - 31.5"
• Base dimensions (BASE ONLY): 37" x 24"
• Backrest angle: 0° flat to 90° incline
• Leg rest angle: 0° flat to 85° decline
• Weight: 140 lbs
• Capacity of 300 lbs
• Cushion thickness: 4"
• Colors available: White or Black
• Unit arrives fully assembled
• Comes with a FREE beauty stool in matching color
• Snazzy fiberglass hydraulic pump cover
• Rotates 360° (Only when the chair is raised to the highest setting)
• Rotation can be stopped with courtesy stopper
• Towel holder on the back of the backrest
• Removeable pillow
• Face hole cutout for when clients are face down
• Leveling feet on base
• Upholstered in vinyl

* All height measurements are from ground to top of cushion

* All measurements have a 0.25 to 0.75 inch tolerance

Description:

This is an ultra-plush hydraulic aesthetician bed with a hydraulic pump for effortless lifting and lowering. The bed also sports a sleek fiberglass base. Its unique design allows you to turn the bed around completely, so you can have the most flexibility and freedom of movement while working with clients. To see all the features in action, please watch the video.

Shipping Dimensions:

• Quantity: 1
• Package: 44” x 28” x 31” (L x W x H)
• Package weight: 160 lbs

Warranty Information:

• 1-year warranty

Disclaimer:

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability:

1. Be sure bed is on a level, non-slippery surface.

2. Be sure to adjust self-leveling feet.

3. Always orient the bed in-line or parallel with the base for treatment purposes.

4. When rotating the bed, it is recommended that there be no client on the bed at that time.

5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.

6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.

7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.

8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.

9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.